🗓️ November 16, 2026  |  11:00 AM – 12:00 PM ET 🌐 Live Online Webinar
Illustration for Determining Root Cause in Sterility Failure Investigations
Sterile Manufacturing & Contamination Control

Determining Root Cause in
Sterility Failure Investigations

A practical investigation framework for tracing sterility failures through laboratory, manufacturing, environmental, and contamination-source evidence to establish a defensible root cause, determine the impact on affected batches, and support appropriate corrective actions.

👤 Danielle DeLucy
📅 November 16, 2026
⏰ 11:00 AM – 12:00 PM ET
🌐 Online Event

Session Details

📅
DateNovember 16, 2026
⏰
Time11:00 AM – 12:00 PM ET
⏱️
Duration60 Minutes
🌐
FormatLive Online Webinar
👤
FacultyDanielle DeLucy
Register Now →

Includes live access & recording

From a Positive Sterility Result to a Defensible Root Cause

A positive sterility result immediately raises a difficult question: did contamination occur during laboratory testing, or does the result indicate a genuine product or manufacturing failure? Answering that requires more than reviewing the test itself. Investigators must examine laboratory controls and practices, manufacturing and filling conditions, environmental data, personnel, equipment, utilities, materials, process history, and other evidence that could explain the contamination.

The investigation becomes more difficult when several plausible causes exist or the evidence does not establish one definitive source. This session examines how to move from possible causes to an evidence-supported conclusion, including contamination-source evaluation, root cause analysis, investigation scope, affected-batch assessment, documentation, and CAPA.

It also addresses when evidence may support invalidating a sterility result and when inconclusive findings cannot justify that conclusion.

A Finding Is Not Yet a Root Cause

A laboratory anomaly, environmental observation, or recovered organism may point investigators in a direction without establishing what actually caused the failure. Sterility investigations need evidence that connects the finding to the event, supports the stated root cause, and withstands scrutiny of the resulting batch decision.


Follow the Investigation as the Evidence Develops. The session progresses from the initial laboratory investigation into manufacturing, filling, and environmental review, then examines contamination-source evidence and root cause tools. It concludes with investigation findings, affected-batch impact, test invalidation considerations, documentation, CAPA, and the decisions required when a definitive root cause cannot be established.

What You Will Learn

By the end of this session, participants will be equipped to move a sterility failure investigation from possible causes to an evidence-supported conclusion.

1

Conduct a Phase I laboratory investigation and identify the evidence needed to establish laboratory error.

2

Extend a Phase II review into manufacturing, filling, environmental, personnel, equipment, and utilities factors.

3

Evaluate contamination sources using recovered organisms and supporting microbiological evidence.

4

Apply 5 Why, Fishbone, interviews, records, and process review to determine root cause.

5

Define investigation scope and assess the impact on affected batches.

6

Recognize when evidence supports invalidating a sterility result — and when it does not.

7

Document probable or definitive root cause with corrective actions and CAPA.

8

Make and document decisions when an investigation remains inconclusive.

Key Takeaways from This Training

Focused areas that will strengthen how your organization investigates and closes sterility failures.

🧫

Phase I & Phase II

Move from the laboratory investigation into manufacturing, filling, environmental, and process review as the evidence develops.

🦠

Contamination Source

Use recovered organisms and supporting microbiological evidence to connect a finding to the actual event.

🔍

Root Cause Tools

Apply 5 Why, Fishbone, interviews, records, and process review to reach a defensible conclusion.

📦

Batch Impact & CAPA

Assess affected batches, support disposition decisions, and document CAPA — including for inconclusive investigations.

Full Session Curriculum

A practical investigation framework from the first positive result to a documented, defensible conclusion.

✓ Phase I laboratory investigation and evidence required to establish laboratory error
✓ Phase II review of manufacturing, filling, environmental, personnel, equipment, utilities, and process factors
✓ Contamination-source evaluation using recovered organisms and supporting microbiological evidence
✓ Root cause determination using investigation data, 5 Why, Fishbone, interviews, records, and process review
✓ Investigation scope, affected-batch assessment, and considerations supporting batch disposition
✓ Documenting probable or definitive root cause, corrective actions, CAPA, and inconclusive investigations

This Webinar Is Designed For

Professionals responsible for sterility assurance, microbiology, quality, and aseptic operations.

🛡️

Quality Assurance

🔬

Quality Control

🧫

QC Microbiology

🧴

Sterility Assurance

🏭

Manufacturing and Production

💉

Aseptic Processing and Filling Operations

✅

Validation

⚙️

Facilities and Engineering

🏛️

Regulatory Affairs

👔

Quality and Manufacturing Management

The Regulatory Landscape Behind This Webinar

A positive sterility result forces an immediate question: was the contamination introduced during laboratory testing, or does it reflect a genuine product or manufacturing failure? Answering it requires evidence from laboratory controls and practices, manufacturing and filling conditions, environmental data, personnel, equipment, utilities, materials, and process history.

Investigations become harder when several plausible causes exist or the evidence does not establish a single definitive source. A laboratory anomaly, environmental observation, or recovered organism may point in a direction without proving what caused the failure — and invalidating a sterility result requires evidence, not inconclusive findings.

This webinar follows the investigation from Phase I through root cause determination, affected-batch assessment, documentation, and CAPA, including the decisions required when a definitive root cause cannot be established.

Meet the Faculty

👩‍🔬
Danielle DeLucy
Quality & Sterility Assurance Consultant

Danielle DeLucy has 15 years of pharmaceutical and biologics industry experience across Quality Management, Product Quality, Sterility Assurance, and QA oversight of filling and packaging operations.

Her background as a Quality Control Pharmaceutical Microbiologist, combined with experience leading regulatory health inspections, directly supports the aseptic processing, contamination control, and sterility investigation considerations addressed in this webinar.

Reserve Your Seat Today

Don't miss this essential training on establishing a defensible root cause in sterility failure investigations. Secure your spot now.

📅 November 16, 2026
⏰ 11:00 AM – 12:00 PM ET
🌐 Live Online
Register Now →
Register Now
← Explore all webinars   ·   Registration and payments are completed on educraft.us.